Spin welding machine applies rotation spindle to control friction under pressure casing heating energy and reach thermoplastic joining. Spin welding can be controlled by electrical motor or pneumatic motor.
MPS-TP Series spin welder applies pneumatic cylinder to force welding from machine top. Machine applies servo system to drive upper fixture rotating to case friction and finish welding. Machine construction is 4-linear-rods guiding design with gear bars to ensure motion balance.
Full automatic line for pipe & flange welding by spin. Machine designed with two welding spindle, pipe and flanges is feeded by machine system as well as automatic unloading after welding.
Spin welder MSP-B75TP is a specially designed welding machine for child carrier wheel by rotation friction.
Spin welding is a kind of frictional joining technique in capability of producing strong, air-tight welding to parts with a circular-axis jointing, which with high bond strength / hermeticity requirements. During spin friction welding, one part half is held stationary in a holding fixture while the other one is rotated against it under pressure at a high speed normally 80~1600 rpm, which results friction at the touch area of two part halves (means the joining area) and causes the joining surfaces to melt until form fuse together, after which stop rotation and keep two part halves together under pressure until the interface of the jointing area cool down and become solidification.
Machine applies rotation friction controlled by servo system to generate heating to material and realize the welding between drain pipe and connector under pressure. Machine is horizontal designed, welding force and clamp controlled by pneumatic system.
